INC 108 انکوباتور
Standard delivery CO2 incubator
We never economise on essential matters. Even in the attractively priced standard model, the INCO CO2 incubator has a unique precision and reliability, because cell, tissue and bacteria cultures, as well as micro-organisms growing in vitro, need protection in a controlled and physiologically ideal environment. You can put together your own customised model from 7 additional modules in the accessories list.
Ventilation and Control
uniform atmosphere and temperature distribution owing to enclosed, non-turbulent ventilation system in working chamber
adaptive, fuzzy-supported, multifunctional, digital microprocessor PID-controller
integral fault diagnostics on temperature, CO2 and humidity limit control
2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
digital 7-day-programme-timer with real time clock, precise minute setting
digital display (LED) of all set parameters, such as temperature, weekdays, time, CO2, humidity and set-up values – language to be chosen in setup
CO2-supply via sterile filter
digital electronic CO2 control with automatic zeroing (infrared measuring system) – range of adjustment 0-10% – resolution 0,1%
intrinsic adjustment of altitude above sea level
CO2-supply being interrupted upon door opening
digital display of set and actual values (LED) of temperature (0,1 °C resolution) and of CO2-concentration (0,1%)
integrated humidity limit control (88-97%) with digital display of relative humidity – resolution of display: 0,5%, setting accuracy: 1%
programme stored on power failure
chip card (STERICard) for sterilisation of working chamber with fixed cycle (4 hrs./160 °C) without removal of sensors and mountings
Heating Concept
large-area multi-function heating system with additional door and back heating to avoid condensation
incl. works calibration certificate for +37 °C
Multiple Overtemperature Protection
with audible and visual alarm in case of over-/undertemperature and over-/under-CO2, open door and empty gas cylinder
independently working, digitally adjustable electronic overtemperature controller TWW protection class 3.1
additional integral over- and undertemperature monitor “ASF” (Auto-Safety-Function) automatically following the setpoint value at a preset tolerance range; audible alarm is activated in case of over- or undertemperature, heating is switched off in case of overtemperature
resolution of display and setting accuracy: 0,1 °C
mechanical temperature limiter TB protection class 1 switching the heating off at approx. 10 °C above max. oven temperature
Textured Stainless Steel Casing
w x h x d: 710 x 778 x 550 mm
fully insulated stainless steel door with double locking and 4-point adjustment
inner glass door with opening (8 mm dia.) to take gas samples
rear zinc-plated steel
Interior-Heating Concept
w x h x d: 560 x 480 x 400 mm, 108 l
easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing, material no. 1.4301 (ASTM 304), hermetically welded
2 perforated stainless steel shelves, 1 stainless steel water dish
Temperature Range
from +20 °C (however, at least 8 °C above ambient temperature) up to + 50 °C
temperature variation in time: < +/-0,1 °C (to DIN 12 880: 2007-05)
temperature uniformity in chamber at 37°C: < +/- 0.3 °C (to DIN 12 880: 2007-05)
Voltage/Power Rating
230 V (+/- 10%), 50/60 Hz
ca. 1.000 W (during heating)
Packing Data
net weight approx. 70 kg
gross weight carton approx. 78 kg
dimensions approx.:
carton w x h x d: 82 x 97 x 67 cm
the appliances must be transported upright
Customs Tariff Number
8419 8998
Country of Origin
Federal Republic of Germany
WEEE-Reg.-No.
Accessories
Comfort module:
two gas connections with quick release connectors, automatic switch-over of gas cylinders T1
Hygiene module:
electropolished interior seamlessly welded by laser T2
Communication module:
USB interface, “Celsius” standard software for programming and logging, ring log memory, printer interface T3
CO2 module:
extended CO2 range from 0 to 20% T4
Premium module:
includes Comfort, Hygiene, Communication and CO2 module T5
Humidity-Modul:
active microprocessor control for humidifying and dehumidifying (40-97% rh), incl. digital indication and auto-diagnostic system ensures even more rapid reaching of set humidity and very short recovery times while avoiding condensate formation; humidity supply with distilled water (from an external tank) by a self-priming pump; integral bacteria block by generating hotsteam, dehumidifying via sterile filter; (standard humidity limit control and water dishes are omitted). Can only be ordered together with new incubator (no retrofitting possible) K7
O2 module:
control of oxygen concentration by N2 inlet; adjustment range 1 % up to 20 % O2; setting accuracy 0,1 % T6
Entry port in the rear, heated, with silicone stopper, 57 mm inner diameter F9
HEPA-filter for chamber according to EN 1822, packed in sterile condition, incl. fixing unit H9
Extra perforated stainless steel shelf, full width E7(x)
Additional stainless steel grid, full width E3(x)
Extra water dish, full width E2(x)
Pressure reducing valve to DIN 8546, incl. gas cylinder monitor H7
IQ check list with works test data for oven as support for validation by customer Q1
OQ check list including one free-selectable CO2-, humidity and temperature value incl. temperature distribution survey for 27 measuring points to DIN 12880: 2007-05 with works test data as support for validation by customer Q2
Software conforming to FDA “Celsius FDA-Edition” for up to 16 units – only with Communication or Premium module Q3
Oven-linked authorisation card (User-ID-Card) – prevents undesired manipulation by unauthorised third parties V1
Computer interface RS485 (for networking a maximum of 16 ovens) instead of interface USB – only with Communication or Premium module V2
Start-up of INCO incubators and brief training (Germany only) through Memmert service. Service not subject to any discount
