خلوص سنج اکسیژن ٍEnviteC آلمان

1. اندازه گیری دقیق میزان خلوص اکسیژن
   مجهز به کالیبراسیون دستی 21% محیط و 100% خلوص اکسیژن
2. جهت اندازه گیری خلوص اکسیژن لوله های سانترال، سیلندر اکسیژن، دستگاههای اکسیژن ساز ، ونتیلاتور و همچنین چادرهای بیهوشی و انکیباتور
3. بالاترین دقت ممکنه با خطای +_ 3 درصد
4. ساخت آلمان 
5. استاندارد CE

• Accurate and reliable response
• Excellent selectivity against CO2
• Excellent signal stability
• High product quality
• Short delivery times
• Technical support
• Made in Germany
• Certified quality management system
• 15 months warranty (without battery)
• Designed for EnviteC Oxygen Monitor OxiQuant S

Technical Specifications OOI103
Measurement range 0 % ... 100 % oxygen (at atmospheric pressure)
Output in ambient air 9 mV ... 15 mV
Electrical interface Gold plated slip rings (3.2 V battery built-in for OxiQuant S)
Repeatability < 1 % volume O2 at constant temperature and pressure
Linearity error < 3 % relative
Response time < 13 s to 90 % of final value
Zero offset voltage < 200 μV in 100 % nitrogen
Cross interference < 0.1 % vol. O2 response to:
15 % CO2 balance N2;
10 % CO balance N2
Influence of humidity -0.03 % rel. per % RH at 25 °C
Pressure range 0.6 bar … 2 bar (ppO2 0 … 1250 mbar O2)
Influence of pressure proportional to change in oxygen partial pressure
Influence of mechanical shock < 1 % relative after a fall from 1 m
Operating temperature 0 °C … +50 °C
Temperature compensation built-in NTC compensation
Effect of temperature compensation
(steady state)
between +25 °C and +40 °C: 3 % relative error
between 0 °C and +50 °C: 8 % relative error
Operating humidity 0 % … 99 % RH non-condensing
Long term output drift < 1 % volume oxygen per month
typically < -15 % relative over lifetime
Storage temperature -20 °C ... +50 °C
Recommended storage +5 °C … +15 °C
Warm-up time < 30 minutes, after replacement of sensor
Weight approximately 45 grams
Part number 01-00-0095