CISCO2801

Cisco 2800 Series Cisco 2801 Cisco 2811 Cisco 2821 Cisco 2851 Product Architecture DRAM * Default: 128 MB * Maximum: 384 MB * Default: 256 MB * Maximum: 768 MB * Default: 256 MB * Maximum: 1 GB Compact Flash * Default: 64 MB * Maximum: 128MB * Default: 64 MB * Maximum: 256 MB Fixed USB 1.1 Ports 1 2 Onboard LAN Ports 2-10/100 2-10/100/1000 Onboard AIM (Internal) Slot 2 Interface Card Slots * 4 slots; 2 slots support HWIC, WIC, VIC, or VWIC type modules * 1 slot supports WIC, VIC, or VWIC type modules * 1 slot supports VIC or VWIC type modules 4 slots, each slot can support HWIC, WIC, VIC, orVWIC type modules Network-Module Slot No 1 slot, supports NM and NME type modules 1 slot, supports NM, NME and NME-X type modules 1 slot, supports NM, NME, NME-X, NMD and NME-XD type modules Extension Voice ModuleSlot 0 1 PVDM (DSP) Slots on Motherboard 2 3 Integrated Hardware-Based Encryption Yes VPN Hardware Acceleration (on Motherboard) DES, 3DES, AES 128, AES 192, and AES 256 Optional Integrated In-Line Power (PoE) Yes, requires AC-IP power supply Console Port (up to 115.2 kbps) 1 Auxiliary Port (up to 115.2 kbps) 1 Minimum Cisco IOS Software Release 12.3(8)T Rack Mounting Yes, 19-inch Yes, 19- and 23-in. options Wall Mounting No Yes No No Power Requirements AC Input Voltage 100 to 240 VAC, autoranging AC Input Frequency 47-63 Hz AC Input Current 2A (110V) 1A (230V) 3A (110V) 2A (230V) AC Input Surge Current 50A maximum, one cycle (-48V power included) AC-IP Maximum In-Line Power Distribution 120W 160W 240W 360W AC-IP Input Current 4A (110V) 2A (230V) 8A (110V) 4A (230V) AC-IP Input Surge Current 50A maximum, one cycle (-48V power included) DC Input Voltage No DC Power Option available 24 to 60 VDC, autoranging positive or negative DC Input Current * No DC Power Option available * 8A (24V) * 3A (60V) * Startup current 50A<10 ms * 12A (24V) * 5A (60V) * Startup current 50A<10 ms Typical Power Dissipation (No Modules) 42W (143 BTU/hr) 32W (109 BTU/hr) 54W (184 BTU/hr) 58W (197 BTU/hr) Power Dissipation-AC without IP Phone Support 150W (511 BTU/hr) 170W (580 BTU/hr) 280W (955 BTU/hr) 280W (955 BTU/hr) Power Dissipation-AC with IP Phone Support-System Only 150W (511 BTU/hr) 210W (717 BTU/hr) 310W (1058 BTU/hr) 370W (1262 BTU/hr) Power Dissipation-AC withIP Phone Support-IPPhones 180W (612 BTU/hr) 160W (546 BTU/hr) 240W (819 BTU/hr) 360W (1128 BTU/hr) Power Dissipation-DC Not applicable 180W (614 BTU/hr) 300W (1024 BTU/hr) 300W (1024 BTU/hr) RPS No External only, connector for RPS provided by default Recommended RPS Unit No RPS option Cisco RPS-2300 Redundant Power System Environmental Specifications Operating Temperature 32 to 104F (0 to 40C) Non-Operating Temperature -4 to 149F (-20 to 65C) -40 to 158F (-40 to 70C) Maximum Operating Temperature at Altitude * 40C @ sea level * 31C @ 6,000 ft (1800 m) * 25C @ 10,000 ft (3000 m) Note: Derate 1.5C per 1000 ft * 40C @ sea level * 40C @ 6,000 ft (1800 m) * 30C @ 13,000 ft (4000 m) * 27.2C @ 15,000 ft (4600 m) Note: Derate 1.4C per 1,000 ft above 6,000 ft Operating Humidity 10 to 85% RH non-condensing 5 to 85%RH, non-condensing Dimensions (H x W x D) * 1.72 x 17.5 x 16.5 in. * (43.7 x 445 x 419 mm) * 1.75 x 17.25 x 16.4 in. * (44.5 x 438.2 x 416.6 mm) * 3.5 x 17.25 x 16.4 in. * (88.9 x 438.2 x 416.6 mm) Rack Height 1 rack unit (1RU) 2RU Weight (Fully Configured) 13.7 lb (6.2 kg) 14 lb (6.4 kg) 25 lb (11.4 kg) Noise Level (Min/Max) * 39 dBA for normal operating temperature (<90F/32.2C) * 53.5 dBA (@ maximum fan speed) * 47 dBA for normal operating temperature (<90F/32.2C) * 57 dBA (@ maximum fan speed) * 44 dBA for normal operating temperature (<90F/32.2C) * 53 dBA (@ maximum fan speed) Regulatory Compliance NEBS No Yes Yes Safety * UL 60950 * CAN/CSA C22.2 No. 60950 * IEC 60950 * EN 60950-1 * AS/NZS 60950 Immunity * EN300386 * EN55024/CISPR24 * EN50082-1 * EN61000-6-2 EMC * FCC Part 15 * ICES-003 Class A * EN55022 Class A * CISPR22 Class A * AS/NZS 3548 Class A * VCCI Class A * EN 300386 * EN61000-3-3 * EN61000-3-2 FIPS-2 FIPS 140-2 Certification for 2801, 2811, 2821, 2851 TELCOM** * For all four platforms, Telecom compliance standards depend upon country and interface type. Interfaces comply with FCC Part 68, CS-03, JATE Technical Conditions, European Directive 99/5/EC and relevant TBR's. For specific information see the datasheet for the specific interface card. * Homologation requirements vary by country and interface type. For specific country information, see the on-line approvals data base:http://tools.cisco.com/cse/prdapp/jsp/externalsearch.do?action=externalsearchpage=EXTERNAL_SEARCHmodule=EXTERNAL_SEARCH