خلوص سنج اکسیژن ٍEnviteC آلمان

اندازه گیری دقیق میزان خلوص اکسیژن مجهز به کالیبراسیون دستی 21% محیط و 100% خلوص اکسیژن جهت اندازه گیری خلوص اکسیژن لوله های سانترال، سیلندر اکسیژن، دستگاههای اکسیژن ساز ، ونتیلاتور و همچنین چادرهای بیهوشی و انکیباتور بالاترین دقت ممکنه با خطای +_ 3 درصد ساخت آلمان استاندارد CE * Accurate and reliable response * Excellent selectivity against CO2 * Excellent signal stability * High product quality * Short delivery times * Technical support * Made in Germany * Certified quality management system * 15 months warranty (without battery) * Designed for EnviteC Oxygen Monitor OxiQuant S Technical Specifications OOI103 Measurement range 0 % ... 100 % oxygen (at atmospheric pressure) Output in ambient air 9 mV ... 15 mV Electrical interface Gold plated slip rings (3.2 V battery built-in for OxiQuant S) Repeatability < 1 % volume O2 at constant temperature and pressure Linearity error < 3 % relative Response time < 13 s to 90 % of final value Zero offset voltage < 200 V in 100 % nitrogen Cross interference < 0.1 % vol. O2 response to: 15 % CO2 balance N2; 10 % CO balance N2 Influence of humidity -0.03 % rel. per % RH at 25 C Pressure range 0.6 bar 2 bar (ppO2 0 1250 mbar O2) Influence of pressure proportional to change in oxygen partial pressure Influence of mechanical shock < 1 % relative after a fall from 1 m Operating temperature 0 C +50 C Temperature compensation built-in NTC compensation Effect of temperature compensation (steady state) between +25 C and +40 C: 3 % relative error between 0 C and +50 C: 8 % relative error Operating humidity 0 % 99 % RH non-condensing Long term output drift < 1 % volume oxygen per month typically < -15 % relative over lifetime Storage temperature -20 C ... +50 C Recommended storage +5 C +15 C Warm-up time < 30 minutes, after replacement of sensor Weight approximately 45 grams Part number 01-00-0095