مرکب یووی افست تویو بلژیک

Technische Steekkaart Fiche Technique Technisches Merkblatt Technical Data Sheet Revision date 16/02/2017 Page 2/4 Excure 20000 Knowing that the final result of a printed matter depends on a diversity of materials and working conditions, this information should only be seen as a guideline, based on our latest research, without any guarantee or commitment from our side. AVAILABLE COLOUR SHADES  Process colours  Mixing system  Opaque white  Other colours: on request REFERENCES EXCURE 20000 IWS Alcohol Nitro Alkali Heatres. Process colours wet offset 10 Yellow EXC20001 5 + + + 180 C Magenta EXC20002 5 + + - 170 C Cyan EXC20003 8 + + + 220 C Black EXC20004 8 + + + 220 C Lightfast process inks Yellow EXC20021 7 + - + 220 C Magenta EXC20022 7 + + + 180 C Base Inks Mixing white EXC20900 Opaque white EXC20901 Transparent white EXC20902 Yellow EXC20912 5 + + + 180 C Yellow fast 6 EXC20913 6 + + + 220 C Yellow IWS 7 EXC20914 7 + - + 160 C Warm yellow EXC20916 5 + + + 220 C Orange EXC20920 5 + + + 140 C Orange fast EXC20921 7 + + + 220 C Warm red EXC20930 3 + + - 180 C Warm red fast EXC20931 7 + + + 220 C Red 032 IWS 7 EXC20933 7 - - + 170 C Rubine red EXC20940 5 + + - 170 C Rubine red fast 6 EXC20941 6 + + + 180 C Rubine red fast 7 EXC20942 7 + + + 200 C Rhodamine red EXC20950 3 - - - 140 C Rhodamine red fast 7 EXC20951 7 + + + 220 C Purple* EXC20952 3 - - - 140 C Purple fast* EXC20953 7 + + + 220 C Violet EXC20960 3 - - - 140 C Violet fast EXC20961 7 + + + 220 C Reflex blue EXC20962 4 - - - 150 C Reflex blue fast* EXC20963 7 + + + 220 C Blue 072 EXC20964 3 - - - 150 C Blue 072 fast* EXC20965 7 + + + 220 C Cyan EXC20970 8 + + + 220 C Green EXC20980 8 + + + 220 C Black EXC20990 8 + + + 220 C *These inks should not be used for mixings, as they are already built up out of other base inks. Revision date 16/02/2017 Page 3/4 Excure 20000 Knowing that the final result of a printed matter depends on a diversity of materials and working conditions, this information should only be seen as a guideline, based on our latest research, without any guarantee or commitment from our side. REMARKS  To improve scuff resistance of non-laminated surfaces, UV-overprint varnishing is recommended.  Cleaning: it is not necessary to wash the press immediately after printing. The Excure 20000 series will not cure in the press and is therefore ready to use for the next days printing. However, the ink may start to cure in the press if sunlight or UV-light from the bulbs / UV-lamp is allowed to shine on the ink.  Shelf life: the Excure 20000 series has a 12-month shelf life guarantee. This guarantee covers 12 months from the date of manufacture (which is mentioned on the label). In order to give this guarantee, certain recommendations must be followed: the Excure 20000 series should be kept on stock at temperatures between 15 20C and they should not be exposed to direct sunlight or heat. If possible, store the ink in a dark room  Rollers: the following roller material is recommended: EPDM (Ethylene-Propylene-Diene-Monomers). EPDM rollers show excellent performance with UV-inks. They are not suitable for conventional inks, since they will swell considerably in contact with aliphatic hydrocarbons, which are used in traditional offset inks  Certain Metallic UV-inks may cause swelling of EPDM rollers  Nitril rubber: nitril rubber rollers show minimal swelling with UV-inks and conventional inks. Solvents such as glycol and acetates do have a tendency to make this rubber swell. Nitril rubber is recommended when using two component metallic inks.  Letterpress plates: the Excure 20000 series can be used together with the majority of the marketed letterpress plate materials. The best results are achieved by using soft plates for solids and harder plates for line, text and process work.  As wet offset series with improved curing and scratch resistance, we recommend EXC20051-54. PACKAGING  1 kg plastics packed in card board boxes of 10 or 20 kg packed in palbox of 140 kg palletbox of 225 kg palletboxx of 360 kg  3 kg plastics packed in card board boxes of 12 or 24 kg packed in palbox of 180 kg palletbox of 270 kg palletboxx of 504 kg  10 kg pails  200 kg barrels  300 kg containers Revision date 16/02/2017 Page 4/4 Excure 20000 Knowing that the final result of a printed matter depends on a diversity of materials and working conditions, this information should only be seen as a guideline, based on our latest research, without any guarantee or commitment from our side. ADDITIVES  Fountain additive pH 5 EXC10900 pH 4.8 EXC10910  Wash-up solution for manual washing EXC10810 for automatic washing EXC10800 labelling and reg. free EXC10820  Antitack paste* EXC10001  Photoinitiator liquid* EXC10704  Thinner EXC10705 * Ask for advice in case of food packaging. RECOMMENDED TREATMENT LEVELS (DYNES / CM) PE PP PVC PET PS PVDC PU ABS PTFE Silicone Litho Min.: 40 40 36 44 42 42 38 42 38 38 Max.: 50 50 52 56 50 52 52 52 52 52 Letterpress Min.: 42 40 40 46 42 42 42 45 42 40 Max.: 54 54 52 60 58 54 56 52 60 56 PRODUCT SAFETY This varnish (or these inks) is (are) NOT suitable for FOOD applications unless a proper risk assessment proves that its use is safe (e.g. if the process rules out the possibility of set-off in the reel or stack AND if the design of the final printed article ensures reliable functional barrier properties to migration). For further information please contact our local sales team or www.toyoink.eu.