مبدل فیبر نوری 1 کانال ویدیو ، دیتا و صدا SAE-1V1bD1bA-S

مبدل فیبر نوری 1 کانال ویدیو ، دیتا و صدا SAE-1V1bD1bA-S با توجه به نوع تکنولوژی های بکار رفته به خصوص در طراحی لینک ها نظیر ASIC و اتخاذ تکنولوژی DSP با سرعت بالا به صورت کاملآ دیجیتال بوده و سیگنال های ویدیویی را بدون فشرده سازی ارسال می نماید. این لینک ها قادر می باشد سیگنال های تصویر با هر شکل غیر فشرده PAL ، NTSCو SECAM را با قابلیت سازگاری اتوماتیک ارسال و در مقصد دریافت نماید. این محصولات می توانند به صورت مستقل یا Stand alone و کابینتی یا Rack mount بسته به نوع استفاده در پروژه تولید گردند. KEY FEATURES 10-Bit Uncompressed Video Transmission Automatically compatible with NTSC, PAL, or SECAM CCTV Supporting any high resolution Video signal No Electrical or Optical Adjustments Required LED Indicators for Instant System Monitoring Standalone or Rack mount Transmit up to 20 km without Optical Attenuation Supporting advance SNMP standard, realize long-distance web controlling Video Feature Video interface: BNC Video input/output impedance: 75Ω (unbalanced) Video input/output Voltage: 1VP-P, Max:1.2VP-P Video Bandwidth:10MHZ Video Sampling: 15MHZ high Speed sampling Video digit bit width: 10/12 bit Differential gain: (10%-90% APL) DG< 1% (Typical Value) Differential phase: (10%-90% APL) DP< 0.8 (Typical Value) Video SNR: S/N 70db (Maximum optical link path loss) Audio Featurs Audio interface: Forward direction, Reverse Direction or Bi-directional Audio Interface terminal: Standard Industrial connecting terminal Audio input/output electric level typical: 0dBm Audio input/output impedance: 600Ω (balanced/unbalanced) Audio input/output amplitude: 2VP-P ( peak value) Audio bandwidth: 20Hz~ 20KHz Sample rate:58.6K Nonlinear distortion coefficient: 1% Audio SNR: S/N 85db Data Features Interface: Standard industrial connecting terminals Controlling Equipment: PTZ decoder, Keyboard, data interface of matrix, High speed dome camera, industrial equipment Interface signals: RS-485(2line), RS232, RS422 and so on Alarm Features Interface: Standard industrial connecting terminals (Alarm, Switch, Remote control) Alarm/Switch input signals: any active or passive alarm/switch input, supporting passive switch Alarm/Switch output signals: any active or passive alarm/switch output, supporting relay contact output Current: Low current, High-current and high voltage can use above 1A/12V Telephone/Switch features Audio band width: 8KHz Way of encoding and decoding: PCM Signal and order controlling: Supporting and kind of signals and orders Communication Terminals supported by the interface; normal telephone and group telephone, PBX, PSTN Way of connecting: point to point ( telephone to telephone or telephone to switch) Ethernet Features Internet speed Rate: 10/100MBPS Auto-adaptation, the default is 100MBPS working condition Supporting Agreement: IEEE802.3U 100Base-TX, 10/100M Communication working format: Full-duplex or half-duplex General Features Operating Temperature: -40ᵒC +85ᵒC Storage Temperature: -45ᵒC +95ᵒC Relative humidity: 0 90 (Non-condensing) Power Voltage: AC85-260V/50Hz MTBF: 105hours Power supplier: 3.5W (Input DC5V 3000mA)