اینورتر G120 زیمنس

:6SL3244-0BA10-0BA0 Description: Siemens Sinamics G120 Control Unit model CU240E. A key component of the modular Sinamics G120 range, the Control Unit must be fitted to a compatible Power Module to form a complete Inverter Drive. The CU240E was cancelled in Oct 2011 and is therefore no longer available. Siemens recommend the CU240E-2 as a possible replacement (see linked products below). Refer to the replacement guide below for further information. Size: 73mm Wide 195mm High 30mm Deep Weight: 0.21kg Operation: VxF, Sensorless Flux Vector. Analogue Inputs: 2 Analogue Outputs: 2 Digital Inputs: 6 Digital/Relay Outputs: 1 Relay Outputs: 2 Motor Temperature Terminals Fieldbus: RS486 for USS, Modbus RTU Part number is 6SL3244-0BA10-0BA0. Model number is CU240E. Download the CU240 Control Unit Manual and replacment guides from the links below: Siemens CU240 Series Control Unit Manual(9.3MB) Siemens CU240E Replacement Guide(251kB) ------------------------------------------------------------------------------------------------------------------------------------ :6SL3224-0BE13-7UA0 Description: Siemens Sinamics PM240 Power Module for 0.37kW (0.5HP) 400V Three Phase Motor to 1.3A at High Overload or when Fan/Pump rated. Converts fixed frequency three phase 400V Input to variable frequency three phase 400V for speed and torque control of a standard AC Induction Motor when used with a compatible G120 Series Modular Control Unit. Add a compatible G120 Series Modular Control Unit and Operator Keypad (see linked products below) to complete the G120 Inverter Drive. Size A - 73mm Wide x 145mm Deep x 173mm High (excluding Control Unit). IP20 Weight: 1.2kg Overload: 150% x 57 seconds every 5 minutes. 200% for 3 seconds every 5 minutes. High Overload. Overload: 110% x 57 seconds every 5 minutes. 150% for 3 seconds every 5 minutes. Fan/Pump Rated. Braking: to 390 Ohm minimum external resistor (not supplied) - use the 'Which Resistor' button on this page. Input Voltage: Three Phase 380V-480V 10% at 50-60Hz 5% Input Current: 1.6A at High Overload, 1.7A when Fan/Pump rated. (EMC Filters: None (external option) Wall mount in clean environment or cubicle mount Rated 50C ambient at High Overload, 40C when Fan/Pump rated Ventilation space in front: 65mm Ventilation space above: 100mm Ventilation space below: 100mm Ventilation space at sides: 30mm Heat Loss at max output: 97W Mounting via 2 x 4.5mm diameter holes at rear on 160mm centres Manufacturer part number is 6SL3224-0BE13-7UA0 Download the Siemens Sinamics G120 Power Module PM240 Installation Manual from the link below: (Siemens Sinamics G120 PM240 Power Module Manual(11.3MB) -------------------------------------------------------------------------------------------------------------------------------- 6SL3224-0BE22-2AA0 Description: Siemens Sinamics PM240 Power Module for 2.2kW (3HP) 400V Three Phase Motor to 5.9A at High Overload or when Fan/Pump rated. Converts fixed frequency three phase 400V Input to variable frequency three phase 400V for speed and torque control of a standard AC Induction Motor when used with a compatible G120 Series Modular Control Unit. Add a compatible G120 Series Modular Control Unit and Operator Keypad (see linked products below) to complete the G120 Inverter Drive. Size B - 153mm Wide x 165mm Deep x 270mm High (excluding Control Unit). IP20 Weight: 4.3kg Overload: 150% x 57 seconds every 5 minutes. 200% for 3 seconds every 5 minutes. High Overload. Overload: 110% x 57 seconds every 5 minutes. 150% for 3 seconds every 5 minutes. Fan/Pump Rated. Braking: to 160 Ohm minimum external resistor (not supplied) - use the 'Which Resistor' button on this page. Input Voltage: Three Phase 380V-480V 10% at 50-60Hz 5% Input Current: 7.6A at High Overload, 7.6A when Fan/Pump rated. EMC Filters: Internal, to EN 55011 Class A (Industrial) Wall mount in clean environment or cubicle mount. Rated 50C ambient at High Overload, 40C when Fan/Pump rated. Ventilation space in front: 65mm Ventilation space above: 100mm Ventilation space below: 100mm Ventilation space at sides: 30mm Heat Loss at max output: 139W Mounting via 4 x 4.8mm diameter holes at rear on 133mm x 258mm centres. Manufacturer part number is 6SL3224-0BE22-2AA0. Download the Siemens Sinamics G120 Power Module PM240 Installation Manual from the link below: Siemens Sinamics G120 PM240 Power Module Manual(11.3MB) کاربرد : کاربری عمومی تا توان 250 کیلووات با قابلیت کنترل وکتور سایر مشخصات: : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :