انکودر MHAP 100 بامر baumer

Technical data - electrical ratings Interference immunity EN 61000-6-2 Emitted interference EN 61000-6-3 Approval CE Technical data - electrical ratings (square-wave) Voltage supply 4.5...30 VDC Consumption w/o load 300mA Pulses per revolution 1...131072 Phase shift 90 10 Scan ratio 40...60% Sensing method Magnetic Output frequency 2MHz Output signals A+, A-, B+, B- Output stages HTL TTL/RS422 Technical data - electrical ratings (SinCos) Voltage supply 4.5...30 VDC Consumption w/o load 300mA Sinewave cycles per turn 1...8192 Phase shift 90 5 Sensing method Magnetic Output signals A+, A-, B+, B- Output stages SinCos 1 Vpp Difference of SinCos amplitude 20mV Harmonics typ. -40dB DC offset 20mV Bandwidth 400kHz (-3 dB) Technical data - electrical ratings (SSI) Voltage supply 4.5...30 VDC Interface SSI Function Singleturn Steps per turn 131072 / 17bit Sensing method Magnetic Code Gray or binary Code sequence CW default Additional output signals Square-wave TTL (RS422) Square-wave universal HTL/TTL SinCos Technical data - mechanical design Sensor head FPGA signal processing Size (flange) 101.3mm Shaft type 16...80mm (through hollow shaft) Axial tolerance 1mm (wheel/head) Radial tolerance 0.1...0.5mm (wheel/head) Protection DINEN60529 IP67(head) IP68(wheel) Operating temperature -20...+85C Operating speed 8000rpm Resistance IEC 60068-2-6 Vibration 30g, 55-2000 Hz IEC 60068-2-27 Shock 300 g, 2 ms Accuracy of magnetic measure 400 Connection Flange connector M23, 17-pin