انکوباتور ممرت آلمان مدل INE 700 memmert

دسته بندی محصول:  ماشین آلات تولید لبنیات


تماس جهت قیمت

حداقل سفارش: 1       موجود

انکوباتورهای ممرت آلمان در ابعاد و حجم های مختلف
INE 700 انکوباتور Stand delivery incubator The heating of this incubator is optimally tuned for both natural convection and forced air circulation; the fan can also be switched off completely, and valuable chamber loads for research, pharmaceutics, medicine and food chemistry are warmed up very carefully. Ventilation and Contorl natural convection continuous adjustment of pre-heated fresh air admixture vent connection with restrictor flap fuzzy-supported PID microprocessor controller with integrated autodiagnostic system with fault indication solid state switching unit 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value digital 7-day-programme-timer with real time clock, precise minute setting, for one set value or ramp operation in combination with: integrated digital timer for tempering profile with max. 4 segments, each segment adjustable from 1 min to 999 hours: DELAYED ON HEATING UP HOLD or HOLD set-temperature-dependent with guaranteed holding time COOLING DOWN Loop function to repeat profile 1-99 times or endless digital display (LED) of all set parameters, such as temperature, weekdays, time, programme status and set-up values resolution of display for set value and actual value 0,1 C long-term logging (ring store) of all relevant data, GLP-conforming as data logger 1024 kB serial interface RS 232 including MEMMERT Software Celsius for programming and documentation incl. works calibration certificate for +37 C Triple Overtemerature protection in case of overtemperature due to failure, the heating is switched off at approx. 3 C above the set temperature (fixed value) independently working, digitally adjustable electronic overtemperature controller TWW protection class 3.1 resolution of display and setting accuracy: 0,1 C mechanical temperature limiter TB protection class 1 switching the heating off at approx. 10 C above max. oven temperature Textured Stainless Steel Casing w x h x d: 1190 x 1080 x 650 mm fully insulated stainless steel doors with double locking and 4-point adjustment inner glass doors rear zinc-plated steel Interior-Heating Concept w x h x d: 1040 x 800 x 500 mm, 416 l easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides 2 stainless steel grids Temperature Range from +30 C (however, at least 5 C above ambient) up to +70 C Voltage/Power Rating 230 V (+/- 10%), 50/60 Hz ca. 1.800 W (during heating) adaption of effective heating power depending on the set temperature Packing Data net weight approx. 131 kg gross weight carton approx. 156 kg dimensions approx.: carton w x h x d: 134 x 131 x 85 cm the appliances must be transported upright Customs Tariff Number 8419 8998 Country of Origin Federal Republic of Germany WEEE-Reg.-No. DE 66812464 Accessories Perforated stainless steel shelf E0(x) Stainless Steel Grid E3(x) Interface USB instead of interface RS232 W3 IQ check list with works test data for oven as support for validation by customer Q1 OQ check list including one free-selectable temperature distribution survey to DIN 12880: 2007-05 (size 200/300: 9 measuring points, size 400-800: 27 measuring points) with works test data for oven as support for validation by customer Q2