انکوباتورهای ممرت آلمان در ابعاد و حجم های مختلف
INE 600 انکوباتور
Stand delivery incubator
The heating of this incubator is optimally tuned for both natural convection and forced air circulation; the fan can also be switched off completely, and valuable chamber loads for research, pharmaceutics, medicine and food chemistry are warmed up very carefully.
Ventilation and Contorl
natural convection
continuous adjustment of pre-heated fresh air admixture
vent connection with restrictor flap
fuzzy-supported PID microprocessor controller with integrated autodiagnostic system with fault indication
solid state switching unit
2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
digital 7-day-programme-timer with real time clock, precise minute setting, for one set value or ramp operation in combination with:
integrated digital timer for tempering profile with max. 4 segments, each segment adjustable from 1 min to 999 hours:
DELAYED ON
HEATING UP
HOLD or HOLD set-temperature-dependent with guaranteed holding time
COOLING DOWN
Loop function to repeat profile 1-99 times or endless
digital display (LED) of all set parameters, such as temperature, weekdays, time, programme status and set-up values
resolution of display for set value and actual value 0,1 C
long-term logging (ring store) of all relevant data, GLP-conforming as data logger 1024 kB
serial interface RS 232 including MEMMERT Software Celsius for programming and documentation
incl. works calibration certificate for +37 C
Triple Overtemerature protection
in case of overtemperature due to failure, the heating is switched off at approx. 3 C above the set temperature (fixed value)
independently working, digitally adjustable electronic overtemperature controller TWW protection class 3.1
resolution of display and setting accuracy: 0,1 C
mechanical temperature limiter TB protection class 1 switching the heating off at approx. 10 C above max. oven temperature
Textured Stainless Steel Casing
w x h x d: 950 x 920 x 650 mm
fully insulated stainless steel doors with double locking and 4-point adjustment
inner glass doors
rear zinc-plated steel
Interior-Heating Concept
w x h x d: 950 x 920 x 650 mm
fully insulated stainless steel doors with double locking and 4-point adjustment
inner glass doors
rear zinc-plated steel
Temperature Range
from +30 C (however, at least 5 C above ambient) up to +70 C
Voltage/Power Rating
230 V (+/- 10%), 50/60 Hz
ca. 1.600 W (during heating)
adaption of effective heating power depending on the set temperatur
Packing Data
net weight approx. 92 kg
gross weight carton approx. 112 kg
dimensions approx.:
carton w x h x d: 110 x 114 x 84 cm
the appliances must be transported upright
Customs Tariff Number
8419 8998
Country of Origin
Federal Republic of Germany
WEEE-Reg.-No.
DE 66812464
Accessories
Perforated stainless steel shelf E0(x)
Stainless Steel Grid E3(x)
Interface USB instead of interface RS232 W3
IQ check list with works test data for oven as support for validation by customer Q1
OQ check list including one free-selectable temperature distribution survey to DIN 12880: 2007-05 (size 200/300: 9 measuring points, size 400-800: 27 measuring points) with works test data for oven as support for validation by customer Q2